Arealer 2.4Inch TFT LCD Display Dual Channel Function Arbitrary Waveform Generator 200MSaS Sampling Rate 13 Bit Vertical Resolution 8k Storage Depth Signal Source Frequency Meter

Independent Channel: Both channels are independent of each other and have phase synchronization function.;Basic Parameters: Sampling rate: 200MSa/S, vertical resolution: 13bit and storage depth: 8k.;Digital Display: 2.4-inch TFT LCD display, 320*240 resolution, with clear graphic interface.;Measurement Mode:measurement mode has 2 functions, one is a frequency meter,other is a counter. They measure digital signals fromexternal input port.;Frequency Meter:frequency meter is used to measurefrequency.frequency is measured by equal precise measurement.coupling and gate time can be set.;Pulse Counter: With 100MHz high precise frequency meter and 32 bit counter.counter is used to countnumber of pulses, and can be set to turn oncoupling and function, as well asnumber of zeroes.;Four Modulation Modes Design: Support for pulse//burst/modulated output.;System Settings:system Settings page displayscurrent software version.It can load and savesystem parameters, setbuzzer to open and close,brightness ofscreen,English and Chinese language switching, and edit, save and load any , calibrate, and restore factory Settings.;Waveform Types: 5 basic waveforms(sinewave, squarewave, rampwave, pulsewave, noisewave) and 32 arbitrary waveforms in-built.;Waveform Storage: Support internal storage of 50 groups of user-defined edited waveforms.;Settable Time Edges: Pulsewave output set in edgestime.;AM//PM Modulation Function: Internal AM, frequency modulation, PM modulation function (External AM, frequency modulation, PM modulation is optional).;ASK/FSK/PSK Modulation Function: Internal/external ASK, FSK, PSK modulation function.;60M Channel Output Frequency: Dual channel output, maximum output frequency 60M.;Waveform Output: Output of linear/logarithmicand burst (pulse train) waveforms.;Standard USB Device Interface: Optional external analogue modulation interface.;Communication Extension Interface:10P communication extension interface of ET33C extends TTL digital signal and serial signal.;Software Support: Equipped with multifunctional arbitrary waveform editing software.;Three Models Available: ET3320C, ET3340C, ET3360C,highest output frequency is 20MHz, 40MHz and 60MHz respectively.